Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Put on gloves to prevent hand injuries.

NOTE:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Take care not to scratch the body surface.

Raise the cover (A) using a auger.

Fig 1: Locating Cover
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the mounting screw and remove the trunk handle (A).

Fig 2: Locating Trunk Handle With Mounting Screw
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screw and clips, then remove the trunk lid trim (A).

Fig 3: Locating Trunk Lid Trim With Mounting Screw And Clips
Courtesy of HYUNDAI MOTOR AMERICA
To install, reverse the removal procedure.
Information
- Replace any damaged clips.