LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Air Conditioning System) >> Auto Defogging Sensor >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the auto defogging cover (A).
    Fig 1: Locating Auto Defogging Cover
    G12023213Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the connector (A) and then remove the auto defogging sensor (B).
    Fig 2: Locating Auto Defogging Sensor And Connector
    G12023214Courtesy of HYUNDAI MOTOR AMERICA
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals