Repair Procedures: Installation
WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wiper motor.
- Install the crank arm.
Tightening torque:
14.7 ~ 19.6 N.m (1.5 ~ 2.0 kgf.m, 10.8 ~ 14.5 lb-ft)
CAUTION:- To install the wiper motor crank arm, make sure that the linkage is aligned with the crank arm in straight line and set the angle of each linkages exactly.
- Install the lower and upper linkage to the wiper motor crank arm.
- Install the wiper motor and linkage assembly and then connect the wiper motor connector.
Tightening torque:
7.0 ~ 11.0 N.m (0.7 ~ 1.1 kgf.m, 5.0 ~ 7.9 lb-ft)
- Install the cowl top cover.
- Install the windshield wiper arm and blade.
Tightening torque:
23.0 ~ 27.0 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)
NOTE:- The windshield wiper motor must be cycled to make sure that it is in the park position. If necessary, adjust the wiper arm and blade.
- Install the wiper arm and blade to the specified position.
- Auto stop position (Blade)