LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Windshield Wiper/Washer System) >> Front Washer Motor >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the washer reservoir.
    NOTE:
    • Before installing the pump motor, check the filter for foreign material or contamination. If necessary, clean the filter into the pump motor.
  2. Install the washer motor.
  3. Install the washer hose.
  4. Connect the washer motor connector and level sensor connector.
  5. Install the tire and wheel guide cover.

    (Refer to Body - "FRONT WHEEL GUARD ")

  6. Install the engine room under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  7. Check the washer motor operation.