Repair Procedures: Reassembly

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation.

Fig 1: Compressing Piston Rod
Courtesy of HYUNDAI MOTOR AMERICA
Using the special tool (09546-3X100), install the self locking nut.
Tightening torque:

98.0 ~ 107.8 N.m (10.0 ~ 11.0 kgf.m, 72.3~ 79.6 lb-ft)

Fig 2: Installing Self Locking Nut Using Special Service Tool (09546-3X100)
Courtesy of HYUNDAI MOTOR AMERICA
NOTE:
- Do not reuse the self locking nut.