LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Eco >> Repair and Diagnosis >> External Pages >> Different car >> Section 247 (Electronic Stability Control (ESC) System) >> ESC Control Unit >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Tighten the HECU mounting bolts and nuts to the specified torque.
  3. After installation, bleed the brake system.

    (Refer to "ESC System Bleeding ")

  4. Conduct the Variant coding.
  5. Conduct the Auto Detected Sensor Calibration.
  6. Conduct the Longitudinal G Sensor Calibration.
scientia non olet · About LEMON Manuals