Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.
Using the SST (09495-3K000), secure the BJ boot bands.

Fig 1: Securing BJ Boot Bands Using Special Service Tool (09495-3K000) (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Securing BJ Boot Bands Using Special Service Tool (09495-3K000) (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
NOTE:
- Do not reuse the boot band.
Install the TJ joint assembly.
(Refer to Driveshaft Assembly - "TJ JOINT ")
Install the front driveshaft.
(Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")
Check the front alignment.
(Refer to Front Alignment - "ALIGNMENT ")