LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Turbo, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System - 1.6L T-GDI >> Battery >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery (-) terminal (A) and then (+) terminal (B).
    Fig 1: Locating Battery (-) And (+) Terminal
    G12124640Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the air duct and air cleaner assembly.

    (Refer to "AIR CLEANER ")

  3. Remove the battery mounting bracket and the insulation pad, and then remove the battery (A).
    Fig 2: Locating Battery With Mounting Bracket Bolt
    G12124641Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the ECM connector (A), and then remove ECM (B) after removing the bolts/nut.
  5. Remove the battery tray (C) after removing the bolts.
    Fig 3: Locating ECM, ECM Connector & Battery Tray With Bolts Or Nut
    G12124642Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals