Repair Procedures: Removal
- Turn ignition switch OFF and disconnect the battery negative (-) terminal.
- Remove the crash pad lower panel.
(Refer to "Crash Pad Lower Panel ")
- Remove the junction box (Passenger compartment).
(Refer to RELAY BOX (PASSENGER COMPARTMENT) )
- Disconnect the TCM connector (A).
- Remove the TCM from the vehicle after removing the mounting bolt (B-2ea) and nut (C).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)