LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Turbo, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Starting System - 1.6L GDI) >> Starter >> Repair Procedures >> Cleaning

Repair Procedures: Cleaning

WARNING: This page is about a different variant/trim than selected.
  1. Do not immerse parts in cleaning solvent. Immersing the yoke assembly and/or armature will damage the insulation. Wipe these parts with a cloth only.
  2. Do not immerse the drive unit in cleaning solvent. The overrun clutch is pre-lubricated at the factory and solvent will wash lubrication from the clutch.
  3. The drive unit may be cleaned with a brush moistened with cleaning solvent and wiped dry with a cloth.
scientia non olet · About LEMON Manuals