LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Turbo, Automatic DCT Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - 1.6L T-GDI >> Ignition Coil >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery negative terminal.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connector (A).
    Fig 1: Locating Ignition Coil Connector
    G12124606Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 2: Pulling Lock Pin & Pushing Clip
    G12124607Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ignition coil (A).
    Fig 3: Removing Ignition Coil With Bolts
    G12124608Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals