LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Turbo, Automatic DCT Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 1.6L T-GDI >> Fuel Pump >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Remove the rear seat.

    (Refer to "REAR SEAT ASSEMBLY ")

  3. Remove the fuel pump service cover (A).
    Fig 1: Locating Fuel Pump Service Cover
    G12124884Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pump connector (A).
  5. Disconnect the fuel feed tube quick connector (B) and the vapor tube quick-connector (D).
  6. Disconnect the fuel pressure sensor connector (C).
  7. Remove the plate cover (E) after removing the bolts.
    Fig 2: Locating Fuel Pump, Fuel Feed Tube Quick, Fuel Pressure Sensor Connectors & Plate Cover
    G12124885Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the fuel pump from the fuel tank.
    Fig 3: Fuel Pump Of Fuel Tank
    G12124886Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals