LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Steering >> Electronic Steering >> Motor Driven Power Steering >> MDPS Assembly >> Repair Procedures >> Disassembly >> Key lock assembly

Key lock assembly

  1. Make a groove on the head of special bolts (A) by a punch.
    Fig 1: Locating Groove On Head Of Special Bolts
    G12125435Courtesy of HYUNDAI MOTOR AMERICA
  2. Loosen the special bolt using a screw driver and then remove the key lock assembly from the steering column assembly.
  3. Reassembly is the reverse of the disassembly.
scientia non olet · About LEMON Manuals