LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System - 1.6L T-GDI) >> RCV Control Solenoid Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air duck (A).
    Fig 1: Locating Air Duck
    G12124861Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the cooling pan control connector (A) and cooling pan & RCV extension connector (B) from the bracket.
    Fig 2: Locating Cooling Pan Control Connector & Cooling Pan Or RCV Extension Connector
    G12124862Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the RCV control solenoid valve connector (A) and vapor hoses (B).
  5. Remove the installation bolts (C) and then RCV control solenoid valve (D).
    Fig 3: Locating RCV Control Solenoid Valve Connector, Vapor Hoses, RCV Control Solenoid Valve & Installation Bolts
    G12124863Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals