LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 1.6L GDI >> Fuel Pump >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Remove the rear seat [LH].

    (Refer to REAR SEAT .)

  3. Remove the fuel pump service cover (A).
    Fig 1: Locating Fuel Pump Service Cover
    G12129486Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pump connector (A).
  5. Disconnect the fuel feed tube quick connector (B).
  6. Disconnect the fuel tank pressure sensor connector (C).
  7. Disconnect the vapor tube quick-connector (D).
  8. Remove the plate cover (E) after removing the installation bolts, and then remove the fuel pump from the fuel tank.
Fig 2: Locating Fuel Pump, Fuel Feed Tube Quick, Fuel Tank Pressure Sensor, Vapor Tube Quick Connectors & Plate Cover
G12129487Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Removing Plate Cover
G12129488Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals