LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 1.6L GDI >> Accelerator Pedal >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Locating Accelerator Position Sensor Connector
    G12129502Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation bolt (B) and nuts (C), and then remove the accelerator pedal module.
Fig 2: Locating Accelerator Pedal Module Installation Bolt
G12129503Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Locating Accelerator Pedal Module Nuts
G12129504Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals