LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Electrical >> Horns >> Repair Procedures >> Inspection >> Horn Relay Inspection

Horn Relay Inspection

  1. Remove the horn relay (A) from the engine room relay box.
  2. There should be continuity between the No. 30 and No. 87 terminals when power and ground are connected to the No. 85 and No. 86 terminals.
  3. There should be no continuity between the No. 30 and No. 87 terminals when power is disconnected.
Fig 1: Inspecting Horn Relay Connector Terminals
G12126147Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Horn Relay Connector Terminals Continuity Chart
G12126148Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals