Repair Procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the front door trim.
(Refer to "FRONT DOOR ")
Remove the grip holder cover, after loosening the screw (4EA).

Fig 1: Removing Grip Holder Cover Screw
Courtesy of HYUNDAI MOTOR AMERICA
Remove the grip holder cover bracket.

Fig 2: Removing Grip Holder Cover Bracket
Courtesy of HYUNDAI MOTOR AMERICA
Remover the power window switch (A), after loosening the bolts (4EA).

Fig 3: Removing Power Window Switch Bolts
Courtesy of HYUNDAI MOTOR AMERICA