LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch >> Repair Procedures >> Inspection >> Measuring Resistance

Measuring Resistance

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: View Of Cruise Control Switch & Connector Terminals
    G12124690Courtesy of HYUNDAI MOTOR AMERICA
  2. Measure resistance between terminals on the control switch when each function switch is ON. (switch is depressed)
    CRUISE CONTROL SWITCH TERMINAL RESISTANCE SPECIFICATIONS

    Function Switch Terminal Resistance
    CANCEL 3 - 4 180Ω ± 5%
    SET/- 3 - 4 330Ω ± 5%
    RES/+ 3 - 4 550Ω ± 5%
    ON/OFF 3 - 4 880Ω ± 5%
  3. If not within specification, replace switch.
scientia non olet · About LEMON Manuals