Repair Procedures: Removal

1. Remove the coupling assembly.

   (Refer to Coupling Assembly - "Removal ")

2. Remove the extension Cable (A).
   Fig 1: Removing Extension Cable

   Courtesy of HYUNDAI MOTOR AMERICA
3. Remove the pressure sensor (A) with 24mm socket.

Tightening torque: 

7.8 ~ 9.8 N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2 lb-ft)

Fig 2: Removing Pressure Sensor With 24MM Socket

Courtesy of HYUNDAI MOTOR AMERICA