LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Tucson Value, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 2.0L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to Engine Mechanical System - "INTAKE AND EXHAUST SYSTEM - 2.0L ")

  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
Fig 1: Locating ETC Module Connector, Coolant Hoses And Installation Bolts
G12044299Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals