Repair Procedures: Removal

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the engine cover.

Fig 1: Locating Ignition Coil Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the ignition coil connector (A).

Fig 2: Locating Ignition Coil With Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the ignition coil (A).

NOTE:

When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

Fig 3: Pulling Lock Pin

Courtesy of HYUNDAI MOTOR AMERICA