LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Tucson Value, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 2.0L) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  4. Remove the installation bolt (C), and then remove the PCSV (D) from the engine.
Fig 1: Locating Purge Control Solenoid Valve, Connector, Vapor Hoses And Installation Bolt
G12044361Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals