LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Tucson Value, 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Motor >> Repair Procedures >> Inspection >> Front Power Window Motor

Front Power Window Motor

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim.

    (Refer to Body - "FRONT DOOR TRIM ")

  3. Disconnect the motor connector from the motor.
    Fig 1: Disconnecting Motor Connector From Motor With Terminals
    G12042960Courtesy of HYUNDAI MOTOR AMERICA
  4. Connect the terminal No. 2 and No. 3 to battery voltage (12V) and check that the motor operates smoothly when connecting the terminals below.

    [Safety Window Motor] 

    Fig 2: Safety Window Motor Connector Terminals Continuity Chart
    G12042961Courtesy of HYUNDAI MOTOR AMERICA
  5. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.

    [Standard Window Motor] 

Fig 3: Standard Window Motor Connector Terminals Continuity Chart
G12042962Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals