LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Tucson Sport, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B) connected to the fuel tank air filter and canister close valve.
  5. Remove the fuel tank air filter after removing the installation nut (C).
    Fig 1: Locating Canister Close Valve Connector, Ventilation Hose And Installation Nut
    G12039445Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then rotate the canister close valve (B) in the direction of an arrow shown in (Fig 3).
  7. Remove the canister close valve from the fuel tank air filter.
Fig 2: Locating Lever
G12039446Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Rotating Canister Close Valve
G12039447Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals