LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Tucson SE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch >> Repair Procedures >> Removal and Installation

Removal and Installation

  1. Disconnect the battery (-) terminal.
  2. Remove the air-bag module from the steering wheel.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  3. Remove the steering wheel.

    (Refer to Steering System - "STEERING WHEEL ")

  4. Remove the steering wheel back cover (A) after loosening the screws.
    Fig 1: Locating Steering Wheel Back Cover With Screws
    G12039273Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the steering remote control connector (A).
    Fig 2: Locating Steering Remote Control Connector
    G12039274Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the steering remote control (A) after unfastening the screws.
    Fig 3: Locating Steering Remote Control With Screws
    G12039275Courtesy of HYUNDAI MOTOR AMERICA
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals