Repair Procedures: Installation
WARNING: This page is about a different car, the 2016 Hyundai Sonata and 2015 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- DO NOT reuse the used injector fixing clip.
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
CAUTION:
- Apply Engine oil to the injector O-Ring.
- DO NOT reuse the used injector O-Ring.
CAUTION:
- DO NOT reuse the used bolt.
CAUTION:
- When inserting the injector, be careful not to damage the injector tip.
CAUTION:
- DO NOT reuse the support disc.
- DO NOT reuse the injector rubber washer.
- When replacing the rubber washer, the steel plate (A) part should face the cylinder head and the rubber plate (B) part should face the injector body part.
CAUTION:
- DO NOT reuse the combustion seal.
CAUTION:
- When tightening the delivery pipe installation bolts, tighten them in accordance with the order ((2) (3) (1) (4)) after hand tightening.
- Installation is reverse of removal.