LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 343 (Automatic Transaxle Control System - 2.0L) >> Shift Cable >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor console.

    (Refer to Body- "FLOOR CONSOLE ")

  2. Remove the air duct.
  3. Disconnect the shift cable (A).
    Fig 1: Disconnecting Shift Cable
    G12055825Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the retainer (A) and nut (B).

    Tightening torque: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8~8.7 lb-ft)

    Fig 2: Removing Retainer And Nut
    G12055826Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the nut (C) from the manual control lever.

    Tightening torque: 

    7.8~11.8 N.m (0.8~1.2 kgf.m, 5.8~8.7 lb-ft)

  6. Remove the cable (B) from the bracket (A) at transaxle assembly side.
  7. Remove the shift cable by pulling it toward the interior.
    Fig 3: Removing Cable From Bracket At Transaxle Assembly Side
    G12055827Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals