LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Engine Control System - 2.4L (Except HEV)) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Sonata and 2015 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Locating Accelerator Position Sensor Connector
    G10573511Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the mounting cap (A).
    Fig 2: Locating Mounting Cap
    G10573512Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolt (A), and then remove the accelerator pedal module.
    Fig 3: Locating Accelerator Pedal Module Installation Bolt
    G10573513Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals