LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Electronic Stability Control (ESC) System) >> ESC OFF Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the crash pad side switch assembly (A) after loosening the screws.
    Fig 1: Removing Crash Pad Side Switch Assembly Screws
    G12056515Courtesy of HYUNDAI MOTOR AMERICA
  4. Check the continuity between the switch terminals as the ESC OFF switch is engaged.
Fig 2: Checking Continuity Between ESC OFF Switch Terminals
G12056516Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals