LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Electronic Stability Control (ESC) System) >> DBC Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the crash pad side switch assembly (A) after loosening the screws.
    Fig 1: Removing Crash Pad Side Switch Assembly Screws
    G12056517Courtesy of HYUNDAI MOTOR AMERICA
  4. Check the continuity between the switch terminals as the DBC switch is engaged.
Fig 2: Checking Continuity Between DBC Switch Terminals
G12056518Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals