Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the lower crash pad.
(Refer to CRASH PAD LOWER PANEL Body ")
Disconnect the stop lamp switch connector (A).

Fig 1: Disconnecting Stop Lamp Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Pull the locking plate (A) as indicated by the arrow.

Fig 2: Pulling Locking Plate
Courtesy of HYUNDAI MOTOR AMERICA
Turn stop lamp switch 45° counterclockwise and remove it.

Fig 3: Turning Stop Lamp Switch 45° Counterclockwise

Courtesy of HYUNDAI MOTOR AMERICA