Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

Information

When removing and installing the hood lifter, an assistant is necessary.
When removing the clips, use a clip remover.

Using a screwdriver, lift the socket clips (A) up slightly on both ends of the lifter (B).

Fig 1: Lifting Socket Clips
Courtesy of HYUNDAI MOTOR AMERICA
Push the socket of the lifter into the bracket for installation.
Information
- Make sure the hood locks/unlocks and opens/closes properly.