LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 279 (Engine Control System - 2.0L) >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the second row seat.

    (Refer to Body - "REAR SEAT ")

  3. Remove the rear seat LH air duct (A) after loosening the mounting nuts.
    Fig 1: Removing Rear Seat LH Air Duct Mounting Nuts
    G12055443Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the seat cable bracket (A) after loosening the mounting nuts.
    Fig 2: Removing Seat Cable Bracket Mounting Nuts
    G12055444Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the fuel pump service cover (A) after loosening the mounting screws.
    Fig 3: Removing Fuel Pump Service Cover Mounting Screws
    G12055445Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the fuel tank pressure sensor (A) after disconnect the connector (B).
Fig 4: Removing Fuel Tank Pressure Sensor
G12055446Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals