Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Disconnect the engine coolant temperature sensor connector (A).

Fig 1: Disconnecting Engine Coolant Temperature Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the spring clip (A), and then pull the sensor from the water temperature control assembly.

Fig 2: Removing Spring Clip
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
- Note that engine coolant may be flowed out from the water temperature control assembly when removing the sensor.