Repair Procedures: Inspection
WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF.
- Disconnect the OTS connector.
- Remove the OTS.
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
- Check that the resistance is within the specification.
Temperature [°C (°F)] Resistance (kΩ) -40 (-40) 52.15 -20 (-4) 16.25 0 (32) 6.0 20 (68) 2.45 40 (104) 1.11 60 (140) 0.54 80 (176) 0.29