LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 279 (Engine Control System - 2.0L) >> Barometric Pressure Sensor (BPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air duct (A).
    Fig 1: Removing Air Duct
    G12055383Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the bar connector (A).
  4. Remove the mounting bolt (B), and then remove the sensor from the intercooler outlet pipe.
Fig 2: Disconnecting Bar Connector
G12055384Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals