LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 276 (Air Conditioning System) >> A/C Pressure Transducer >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Recover the refrigerant with a recovery/charging station.
  3. Disconnect the A/C pressure transducer connector (A).
    Fig 1: Locating A/C Pressure Transducer Connector
    G12055176Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the A/C pressure transducer (A).

    Tightening torque: 

    10 ~ 12 N.m (1.02 ~ 1.22 kgf.m, 7.4 ~ 8.8 lb-ft)

    Fig 2: Locating A/C Pressure Transducer
    G12055177Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: Be careful not to bend the liquid & suction pipe.
  5. Install in the reverse order of removal.
    NOTE: When installing, replace it with a new O-ring (A).
    Fig 3: Locating O-Ring
    G12055178Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals