Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front door module.
(Refer to Front Door - "FRONT DOOR MODULE ")
Remove the front door outside handle base (A) by pushing in the lock pins located in the back.

Fig 1: Removing Front Door Outside Handle Base
Courtesy of HYUNDAI MOTOR AMERICA
Open the front door outside handle cable cap (A).
Remove the front door outside handle cable (B).

Fig 2: Opening Front Door Outside Handle Cable Cap
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the front door latch connector (B).
Remove the front door latch assembly (A) by pulling it.

Fig 3: Removing Front Door Latch Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the front door inside handle cable (A) by pulling it.

Fig 4: Removing Front Door Inside Handle Cable
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Make sure the connector is connected properly.
- Make sure the door locks/unlocks and opens/closes properly.
- Replace any damaged clips.