LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Airbag Modules And Clock Spring) >> Passenger Airbag (PAB) Module >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the glove box housing.

    (Refer to Body - "GLOVE BOX HOUSING ")

  3. Remove the passenger airbag mounting nuts (A).
    Fig 1: Removing Passenger Airbag Mounting Nuts
    G12056319Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the passenger airbag connector (A) and active vent connector (B).
    Fig 2: Disconnecting Passenger Airbag Connector And Active Vent Connector
    G12056320Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the crash pad.

    (Refer to Body - "MAIN CRASH PAD ASSEMBLY ")

    NOTE: Replace the crash pad which is damaged while PAB is deployed.
  6. Remove the mounting bolts from the crash pad. Then remove the passenger airbag.
    CAUTION: The removed airbag module should be stored in a clean, dry place with the airbag cushion up.
scientia non olet · About LEMON Manuals