LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Charging System) >> Battery >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery terminals (A).
    Fig 1: Identifying Battery Terminals
    G10749711Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the air duct and air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Remove the battery insulation pad.
  4. Remove the battery (A) after removing the mounting bracket.
    Fig 2: Removing Battery
    G10749712Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the ECM.

    (Refer to "ENGINE CONTROL MODULE (ECM) ")

  6. Remove the battery tray (A) after removing the bolts.
    Fig 3: Removing Battery Tray
    G10749713Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals