Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Remove the air cleaner assembly.
(Refer to: Engine Mechanical System - "AIR CLEANER ").
Disconnect the neutral position switch connector (A).

Fig 1: Identifying Neutral Position Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the neutral position switch.

Fig 2: Removing Neutral Position Switch
Courtesy of HYUNDAI MOTOR AMERICA
Replace a new one and install the neutral position switch, then connect the connector.
Tightening Torque:

39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)