LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Smart Key Unit System) >> Smart Key Unit >> Repair Procedures >> Removal >> Exterior Bumper Antenna

Exterior Bumper Antenna

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear bumper beam assembly.

    (Refer to: Body - "REAR BUMPER BEAM ASSEMBLY ").

  3. Disconnect the connector, then remove the rear bumper antenna (A) with loosening 2 screws.
    Fig 1: Loosening Rear Bumper Antenna Screws
    G10751389Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals