LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Smart Key Unit System) >> Smart Key Diagnostic >> Repair Procedures >> Inspection >> Interior Antenna Actuation Check

Interior Antenna Actuation Check

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the Smart Key in the following shade area and check the IG ON.
    Fig 1: Identifying Smart Key Shaded Area
    G10751356Courtesy of HYUNDAI MOTOR AMERICA
  2. If the ignition is ON, the antenna runs normal.
  3. Check the interior antenna ignition mode.
  4. Set the Smart Key in the following shade area and actuate the antenna. Check the LED of smart key is blinking.
    Fig 2: Locating Smart Key Interior 1, Interior 2, Bumper And Trunk Shaded Area
    G10751357Courtesy of HYUNDAI MOTOR AMERICA
  5. If the LED of Smart Key is not blinking, check the antenna in shade area.
    Fig 3: Locating Antenna Connector
    G10751358Courtesy of HYUNDAI MOTOR AMERICA