Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

NOTE:

Take care not to scratch the body surface.

After loosening the mounting screws, then remove the steering column shroud lower panel (A).

Fig 1: Loosening Steering Column Shroud Lower Panel Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the steering column shroud upper panel (A).

Fig 2: Locating Steering Column Shroud Upper Panel
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Replace any damaged clips.