LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System (PHEV) >> Filler-Neck Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Open the fuel filler door and then remove the filler-neck installation screw (A).
    Fig 1: Filler-Neck Installation Screw Locations
    G11631120Courtesy of HYUNDAI MOTOR AMERICA
  3. Lift the vehicle.
  4. Remove the rear-LH wheel, tire, and the inner wheel house.
  5. Remove the rear sub frame. (Refer to REAR SUSPENSION SYSTEM )
  6. Disconnect the fuel filler hose (A) and the leveling hose (B).
  7. Disconnect the vent hose (C).
    Fig 2: Locating Fuel Filler Hose And Leveling Hose
    G11631121Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the filler-neck assembly from the vehicle after removing the bracket installation bolt (A).
    Fig 3: Locating Filler-Neck Assembly Bracket Installation Bolt
    G11631122Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals