LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Automatic Transaxle Control System) >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Remove the air duct.

    (Refer to: Engine Mechanical System - "AIR CLEANER ").

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Solenoid Valve Connector Location
    G00563772Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure resistance between sensor signal terminal and sensor ground terminal.
  5. Check that the resistance is within the specification.
scientia non olet · About LEMON Manuals