Rear Power Window Switch

Disconnect the negative (-) battery terminal.
Remove the rear door trim.
(Refer to Body - "REAR DOOR TRIM ")
Remove the power window switch assembly after disengaging the mounting clips.

Fig 1: Removing Power Window Switch Assembly Mounting Clips (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Removing Power Window Switch Assembly Mounting Clips (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Information
- Replace any damaged clips.
Fig 3: Locating Damaged Clips (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Locating Damaged Clips (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA