Repair Procedures: Inspection
WARNING: This page is about a different variant/trim than selected.
Information
- Transfer oil should be inspected and refilled every 60000 km (40000 mile)/4 year.
- Remove the under cover (A).
- Remove the oil filler plug (A).
- Check the oil level.
Information
Oil level must be up to fill the hole, if not, add oil until it runs over.
- Install the oil filler plug with new gasket.
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
- Install the under cover.
Tightening torque:
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)