LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Santa Fe XL Base >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery negative terminal.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connector (A).
    G12033786Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    G12033787Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ignition coil (A).
G12033788Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals